Multi-Current Universal Smart Charger for 9.6V - 18V NiMH Battery Packs
|
| Features |
- Universal Fast Smart Charger is designed for charging any NiMH / LiFe Battery Pack from 9.6V - 18V, for 8 to 15 cells pack.LED flashing red-green-red before charging (no battery connection) in order to test the IC of the charger if ready to use. It is a very smart charger. Just plug it in and wait for the battery to get fully charged. Red LED indicates charging and Green LED means fully charged Short circuit protection: No output voltage from the charger if the battery is not connected. 110-240V AC input for worldwide use.
|
| Specs & Functions |
- Auto detect battery pack voltage and set up proper charging voltage Cut-off power automatically by negative delta V IC when battery pack is fully charge. Built in IC protecting battery from over current, short circuit & reverse polarity.
|
| Charging Current |
Two current levels: 0.9A and 1.8A selectable by a switch for both low (< 2800mAh) and high capacity battery pack (> 2800mAh) |
| Charging time |
The smart charger will cut-off power automatically when battery is full. However, Charging time can be estimated as the follow:
Time ( Hrs ) = Battery capacity (Ah) / Charging current ( 0.9A or 1.8A )
|
| Dimension (LxWxH) |
140mm x 64mm x 38mm (5.5" X 2.5" X 1.5") |
| Weight |
272g (0.6 lb) |
| Accessories included |
One 5' cable with female MOD connector.
|
|
|
| Certificated |
- CE & UL approved, EMC & ESV approved.
|
| Precautions |
- Please don't use the charger to charge battery pack with capacity less than 900 mAh. The charger is designed for indoor use only. The charger should be horizontally positioned and work in well ventilated condition, avoid moisture and keep it away from inflammable explosive goods. Ambient temperature shall not be more than 40 degree C when using the charger
- Remove the AC power before connect or disconnect the charger with batteries.
|
| Warranty |
Our Charger comes with a 12 Month Warranty.
Please read our Warranty restriction.
|